Shut-Off valve speedfit to Nptf connector in different measures

New product

John Guest polypropylene shut off valves speedfit to Nptf connector in different measures

Price per piece

6,90 €

John Guest polypropylene shut off valves speedfit to Nptf connector ideal for the installation of water treatment systems.

The range of shut off valves of the PP series is made in polypropylene with EPDM seals. Polypropylene has the advantage of being more resistant than acetal resin. The shut-off valves are suitable for drinking water.

These shut off valves are not suitable for air or inert gases

Technical features

- Push-fit technology
- Quick disconnection without the need for tools
- High chemical resistance
- EPDM seals
- 1/4 turn from open to closed
- Not suitable for air or inert gases

Available measures:

PPSV500822W Tube OD - Thread Nptf: 1/4" x 1/4"

PPSV501222W Tube OD - Thread Nptf: 3/8" x 1/4"

How to make a connection



Cut the tube square 



Cutter



Cut the tube square and remove burrs and sharp edges. Ensure the outside diameter is free of score marks. For soft or thin walled tube we recommend the use of a tube insert. 



Push up to tube stop 



Push



Push the tube into the fitting, to the tube stop. 



Pull to check secure 


Pull



Pull on the tube to check it is secure. Test the system before use. 



To disconnect


Push in collet and remove tube 



Disconnect



To disconnect, ensure the system is depressurized, push the collet square against the fitting. With the collet held in this position the tube can be removed.

Related Products

John Guest polypropylene shut off valves speedfit to speedfit connector in different measures Price per piece

From 6,00 €

John Guest polypropylene shut off valves speedfit 3/8" to male nptf adaptor 3/8" Price per piece

6,00 €

Feedaty Reviews (0)

There are no reviews

Top