Everpure 4CB5 replacement filter 22.680lt. – 5 micron

Everpure 4CB5 water filters
This filter is composed of Carbon Block material with 5 micron filter density. It removes taste and bad smell, chlorine, dirtiness, rust, material in sospension not visible to the naked eye, mildew and algae.

Why can you use the Everpue 4CB5 replacement cartridge

– Ideal for catering machines, postmix and fountains in general.

– Improve taste of beverages and post-mix systems.

– Protect from clogging, corrosion and wear.

– No electrical connection required.

– Vertical installation.

– The rapid filter is easy to install and replace without the use of special tools.

Features:

– Chlorine reduction

– Reduction of particulate in suspension

– Technology: Carbon Block

– Micron rating: 5 micron

– Service life: 22.680 litri (6.000 galloni)

– Service flow rate: 6,3 l./min. (1,67 gpm)

– Temperature: 35 – 100°F (2 – 38°C)

– Pressure: 10 – 125 psi (0.7 – 8.6 bar), no-shock.

– Size: 4

– Filter dimensions HxD (mm.): 4CB5 368,29×82,5(mm.) – 14,5”x3.25″(In.)
(Leave a vertical space of about 7 cm under filter to allow replacement.)

– Activation: it’s advisable to run water flow through filter at maximum pressure and full flow rate, for at least 5 minutes to allow air purging and flushing of filter.

– Filter Change: when capacity is reached or when the flow comes too slow (precipitates under 0,7bar/10psi), every 6 months but at least annually.